Compatible with any type of pool, this is just what you need to light up pre-moulded or liner pools! Screws into a vacuum fitting or wall fitting with a 1.5” thread.
Did you know? Originally sold with a white crown, the flat projector is now available in light blue, sand, light grey, dark grey and matt metal. Match the crowns to the colour of the pool to delight your customers!
Pictures and videos
Ref : 502877
Size : 290 mm
Colour : RGB with remote control
Luminous power : 510lm max
LED number : 90
Power : 16 WATTS
Ref : 502860
Size : 290 mm
Colour : WHITE
Luminous power : 1450lm
LED number : 60
Power : 13,5 WATTS
Ideas and recommendations
When using for the first time, it is necessary to pair the remote control provided with the colour projector. As an optional extra, you may install a radio switch between the lamp (or group of lamps) and the ~12V transformer in order to remotely turn the device on and off, or synchronise multiple devices.
These pool projectors must be connected to a two-coil insulated safety transformer that is at least 20% more powerful than the total power absorbed by the connected projectors. It is important to check the compatibility of the vacuum fitting before finalising installation. Certain models equipped with a stop thread are not suitable. The wall fitting will be connected to the connection box with watertight conduit. For best results, use connection accessories from SEAMAID to guarantee a completely waterproof installation.
Roll the extra cable up in the connection box to ensure that you will be able to replace the projector in the future out of the water. As an optional extra, you may install a radio switch between the lamp (or group of lamps) and the ~12V transformer in order to remotely turn the device on and off, or synchronise multiple devices.
This practical, technical catalogue is a must-have for professionals looking for projectors that are easy to install and use.